On-site welding services

On-site welding services are great for projects that cannot feasibly be done in the shop, or would get better results being managed on-site, for example routine maintenance and repair services to steel buildings, construction, and installs. We offer solutions for a wide selection of steel fabrication and welding issues. The emergency On-site support that we deliver is simply a modest portion of what SG Services can offer.

Walkway and Staircase Construction

SG Services LTD is the North West’s leading provider of steel staircase and walkways. With 4 decades of experience, we’ve made 100s of walkway and staircase projects. Our remarkable mezzanine floors will be of the very best quality presenting safety and accessibility across lots of sites in Britain. Should you be looking for excellent quality of build at the right cost, contact us now to organize an on-site visit.

MMA Welding

Manual Metal Arc Welding is regarded as the regularly used steel fabrication process in most forms of industry. The ease and versatility of MMA products will allow it to be the main technique for servicing and repair steel fabrication.

It is actually a preferred process of Steelwork Fabrications in Leigh to work with the subsequent metals:

• Cast iron
• High alloy steel
• Stainless steel
• Carbon Steel
• Low alloy steel
• Ductile iron

TIG Welding

TIG Welding can be a great way of addressing on-site welding issues. Particularly in maintenance welding, it is used to repair tools and dies in components such as aluminum and magnesium.

Some of the main benefits of TIG welding are:

No sparks or spatter

Because only the necessary amount of filler metal is added to the welding puddle, no spatter or sparks are produced (if the metal being welded is clean).

No flux or slag

Because the Argon gas protects the weld puddle from contamination, no flux is required or used in TIG welding and there is no slag to block your view of the weld puddle. Also, the finished weld will not have slag to remove between weld passes.

No smoke or fumes

TIG welding does not create smoke or fumes, unless the base metal being welded contains contaminants or elements such as, oil, grease, paint, lead or zinc. The base metal should be cleaned before welding.

At SG Services our welding technicians are masters of their craft, priding themselves on producing consistently high quality work. This is particularly highlighted in our approach to all TIG work we complete.

MIG Welding

Metal Inert gas (MIG) Welding, occasionally referred to as Metal Active Gas (MAG) Welding, is a method of steel fabrication that can be semi-automatic or automatic.
This gives it a versatility and speed that make it a common choice for a lot of industry welding. The welding time in particular can make it the best solution for emergency on-site steel fabricators.

Although MIG Welding was developed for the fabrication of aluminum and nonferrous metals, it can now be successfully applied to steels.

SG Services have safety in mind for all work that we undertake. Because of the dangers in using MIG Welding in areas of air volatility, we rarely use MIG welding as a solution to any site that is outdoors.

What is the difference between MIG welding and TIG welding?

The difference between the two is the way the arc is used. MIG (metal inert gas) welding uses a feed wire that constantly moves through the gun to create the spark, then melts to form the weld. TIG (tungsten inert gas) welding uses long rods to fuse two metals directly together.

Professional Steelwork Fabrications in Leigh

SG Services has over 40 years of experience in all aspects of Steelwork Fabrications in Leigh. Our fully equipped workshop enables us to provide solutions for all of these aspects.

As well as the MMA, MIG, and TIG welding services explained on this website we can also offer:

• Saw cutting services
• Cropping and punching facilities
• Drilling
• Plasma cutting
• Machining
• Folding and rolling

Contact us for Steelwork Fabrications in Leigh

If you have a steel fabrication issue not covered in the above list, feel free to give us a call on 0161 764 7562 or email us at sales@sgservicesltd.co.uk and one of our dedicated team will be happy to discuss it with you.

Design Codes & Standards